This silent, rough-cut footage shows the manufacture, handling, quality control testing, and testing of shells — probably 105mm howitzer shells — for the U.S. Army. The manufacturer is not certain but the rolls of film are marked “amatex”, possibly indicating that the explosive being used is a form of amatol. It’s also possible that “amatex” stands for the Longhorn Army Ammunition Plant, which was located in Karnack, Texas. Some highlights include installation of end caps (:30), manufacture of explosives or shell lining material (3:26), weighting of explosives (4:05), filling shells with explosives or shell lining material (7:10), heat treatment (11:55), filling shells with explosive or shell lining (14:30), filled shells (17:40), filled shell split in two, to detect flaws (19:45), plant gate (21:26), storage facility (21:53) or revetment, with stacks of shells inside on palettes.
The 105 mm M101A1 howitzer (previously designated M2A1) is an artillery piece developed and used by the United States. It was the standard U.S. light field howitzer in World War II and saw action in both the European and Pacific theaters. Entering production in 1941, it quickly gained a reputation for accuracy and a powerful punch. The M101A1 fires 105 mm high explosive (HE) semi-fixed ammunition and has a range of 12,330 yards (11,270 m), making it suitable for supporting infantry. The gun fired semi-fixed ammunition, with 105 mm Cartridge Case M14. The propelling charge consisted of a base charge and six increments, forming seven charges from 1 (the smallest) to 7 (the largest). Use of M1 HE rounds prepared for the 105 mm howitzer M3 (same projectile and cartridge, but different propelling charge) was authorized.
HEAT M67 Shell was originally designed as fixed round, with Cartridge Case M14 type II. It was later changed to semi-fixed type with the standard cartridge, but with non-adjustable propelling charge. For blank ammunition, a shorter Cartridge Case M15 with black powder charge was used
Amatol is a highly explosive material made from a mixture of TNT and ammonium nitrate. The British name originates from the words ammonium and toluene (the precursor of TNT). Similar mixtures (1 part dinitronaphthalene and 7 parts ammonium nitrate) were known as Schneiderite in France. Amatol was used extensively during World War I and World War II, typically as an explosive in military weapons such as aircraft bombs, shells, depth charges, and naval mines. It was eventually replaced with alternative explosives such as composition B, torpex, and tritonal. Amatol exploits synergy between TNT and ammonium nitrate. TNT has higher explosive velocity and brisance, but is deficient in oxygen. Oxygen deficiency causes black smoke residue from a pure TNT explosion. The oxygen surplus of ammonium nitrate increases the energy release of TNT during detonation. Depending on the ratio of ingredients used, amatol leaves a residue of white or grey smoke after detonation. Amatol has a lower explosive velocity and correspondingly lower brisance than TNT but is cheaper because of the lower cost of ammonium nitrate.
We encourage viewers to add comments and, especially, to provide additional information about our videos by adding a comment! See something interesting? Tell people what it is and what they can see by writing something for example: “01:00:12:00 — President Roosevelt is seen meeting with Winston Churchill at the Quebec Conference.”
This film is part of the Periscope Film LLC archive, one of the largest historic military, transportation, and aviation stock footage collections in the USA. Entirely film backed, this material is available for licensing in 24p HD, 2k and 4k. For more information visit http://www.PeriscopeFilm.com
